The aluminum radiator is surrounded by a black plastic shroud/case of a kind. It has holes for easy fan mounting. However, I was disappointed to see that this black shroud came apart very easily, so I secured it with some cheap tape, as you can see in the pictures (doesn't look too good, I know). If I hadn't used the tape, the back plate with the fan on it would have fallen off when putting it in its upright position. The supplied fan is a standard 80mm with a motherboard 3-pin connection. The radiator itself is very light weight and only a very few of the fins were dent out of normal position.

Radiator with a shroud (that seems to hold together without tape, unlike mine). Picture from 3R Systems.

The radiator mounted inside the case.

A close up of the radiator inlet and outlet

<< Back | 1 | | 2 | | 3 | | 4 | | 5 | | 6 | | 7 | Next >>