Random Phrase: Make yourself at home...


Read Me First!

This is the Spode's Abode archive. The old articles and forum have been kept here purely for historical purposes and are no longer updated.

Not all portions of this archive may work as expected.


Please visit the new site.



AcoustiCase C6606
Written by Peter Barnard (17/Jan/04)
Page 5 of 5
Supplied By: QuietPC

Untitled Document

Build Quality

The build quality of the AcoustiCase is generally very good, with absolutely no give in the structure at all. It is no lightweight, but it definatly wont bend or break. The AcoustiCase is stronger and more rigid than my Globalwin 802, and puts the average aluminium case to shame. You get what you pay for however, and these are the sort of standards I would expect from a case in the £100 price range.

The edges are rolled over in most places, with only a couple of places you could skin a knuckle, and nowhere you could actaully cut yourself. There is a slight edge to the metal beside the PCI slots, and to the sticking out tabs which hold down the case lid.

The heavy construction helps reduce noise by eliminating rattle and vibrations from fans and hard drives.

Cooling

The only fan mounts in the case are the 120mm rear exhaust, and a 80mm front intake. The front intake is so restricted as to be useless, and the rear exhaust is quite restrictive too. However, the rear grille is open enough to accommodate a 120mm fan run at 5 volts quite happily, which would provide sufficient ventilation for even the latest systems, if run at stock speeds. The cooling provision is not good enough for overclocking, with the possible exception of older CPUs, such as durons or celerons. This is not much of an issue, since fitting high performance fans would undo all the sound dampening efforts the case makes.

Conclusions

The AcoustiCase does the job of holding your PC together quietly and efficiently. The high build quality, general solidity, effective noise reduction, and understated styling combine to make a case that just does its job with a minimum of fuss. Overclockers may well find it has too little cooling potential, Case Modders may opt for a more flashy looking case, but for those that want a case that shuts up and does its job, the Acousticase is a very good buy.

The AcoustiCase is the ideal candidate for an environment like a recording studio, where both ambient noise and EMI suppression are very important issues.

The AcoustiCase is stocked by quietpc.com, who were kind enough to send us this review sample.

It costs £104.58 including vat, and comes in black, as reviewed, or beige (at the same price).

Also worthy of consideration is the AcoustiCase C6607, which is a slightly larger version, sporting a 120mm intake, and more bays. Strangely, this costs slightly less, at £99.88 including vat.


<< Back | 1 | | 2 | | 3 | | 4 | | 5 | Next >>



Copyright Andrew Miller
Please read our disclaimer

Search the site:

Random